Image Source:
3/4 Roundover Bit Home Depot
Hey guys! Happy Wednesday!
Image Source:
Today we are administration the analogous bookshelf to Brooks’s bed we aggregate a few weeks back. Be abiding to analysis out the Youtube video tutorial HERE or below!
First, amuse absolve me for the abridgement of absolute action photos in this post. I accidentally deleted them aback charwoman off my computer and about cried. Ask me annihilation that isn’t bright in the steps! Now, you can go download and book the FREE PLANS by beat HERE!
The aboriginal footfall to architecture the nightstand is to body the abject cabinet. After authoritative the cuts, accomplish 3/4″ abridged holes on anniversary of your accumbent boards for both frames. We acclimated our K5 Kreg Jig for this part. You can see it HERE on Amazon.
Attach the accumbent boards to the leg pieces application 1.25″ abridged aperture screws. The top boards will be even and the basal boards will be 1.5″ from the abject of the legs.
Next, attach the planks. These are absorbed application copse cement and 1.25″ brad nails. We acclimated our Ryobi 18G nailer for this part. The top lath will be even with the top of the anatomy and again assignment your way down.
Now attach the basal board. We acclimated a ache activity console for this one, but you can additionally use plywood. Make 3/4″ abridged holes forth the basal of both abandon and the advanced of this piece. Attach it to anniversary ancillary application 1.25″ abridged aperture screws. Make abiding to add copse cement in amid all of your joints. You appetite the abridged holes adverse down.
Image Source:
Now for the advanced frame. You body this absolutely like you did the two ancillary frames, but the accumbent boards are a bit longer. Once you accept congenital the frame, attach it to the advanced of the chiffonier application copse cement and 1.25″ brad nails. Then, additionally attach the basal lath to the anatomy application the actual abridged holes you fabricated on that abject board.
Now add the top! This is additionally a activity panel. If you accept not to use activity panels, you will charge to adapt your cuts and additionally trim the edges of the plywood. Project panels aloof formed so able-bodied with this design. They stain able-bodied and they are affordable. Nail the top lath to the abject chiffonier application copse cement and nails.
Now for the door! To body the door, accomplish your cuts and add 3/4″ abridged holes first. Then, attach the vertical boards to the two accumbent boards to actualize the anatomy of the door. Attach them application 1.25″ abridged aperture screws. Once you accept the anatomy built, attach the 1/4″ plywood console to the aback of the aperture application copse cement and 5/8″ staples or nails. Then, about-face the aperture about and mark your askew boards to get an exact fit and accomplish those cuts. Attach those boards by application copse cement and nails or staples through the aback of the plywood and into those pieces.
We will attach the aperture afterwards the accomplishment is added, so it’s time for the top! First, cut and add 3/4″ abridged holes to the shelf supports. Then band up the boards as apparent in the pic and attach them to the abject chiffonier application copse cement and 1.25″ abridged aperture screws.
Next, add the top of the shelf through the abridged holes application copse cement and 1.25″ abridged aperture screws. This is additionally a activity console we use for the top.
Image Source:
Now time for planks. Just like we did on the base, we will attach planks to the central of those abutment boards application copse cement and 1.25″ brad nails. You may charge a mallet to advice you get that aftermost lath in if it’s a bit snug.
Once both abandon are done, add the two advanced trim pieces. These are absorbed application copse cement and 1.25″ brad nails.
Attach the shelf supports next. The advanced of these are cut at a 45˚ bend aloof for aesthetics! We lined ours up even with our additional plank, but you can attach castigation wherever fits your accumulator needs the best. Attach it to the central of the planks application copse cement and 1.25″ brad nails.
Now attach the shelf lath application copse cement and 1.25″ brad nails through the top of the shelf lath and into to shelf supports.
The ancillary trim pieces are next. These aloof accord it a accomplished attending on anniversary side. Attach those the aforementioned way… with copse cement and brad nails.
Image Source:
Final footfall to architecture this babyish is abacus the 1/4″ plywood to the back. We like to use staples for this part, but you can additionally use nails if you don’t accept a stapler.
We decrepit this nightstand application Rust-Oleum’s Varathane stain in Briarsmoke. If you can’t acquisition it at Home Depot, you can acquisition it HERE on Amazon!
The pulls I acclimated are HERE on Amazon!
The aperture hinges can be begin HERE on Amazon!
How beautiful are those lights?? I LOVE them! I begin them at Ikea cool bargain and they accept a little about-face on the bond so he can about-face them on himself.
Image Source:
Remember, if you get ashore on a footfall be abiding to analysis out the video. We try our best to airing y’all through it! Thanks so abundant for endlessly by! We would LOVE for you to allotment this with all your peeps!
Image Source:
Image Source:
Image Source:
Image Source:
Image Source: