Image Source:
Bench Dog Work Bench Home Depot
When you appetite to use the accomplished top of your workbench, a assuredly army anchor or grinder aloof gets in the way. Free up amplitude by ascent your grinder and anchor to a double-thick allotment of 3/4-in. plywood and blind them on the end of your board until they're needed.
Cut four 20-in.-long x 12-in.-wide pieces of 3/4-in. plywood. Glue and attach them calm in pairs to accomplish two 1-1/2-in.-thick slabs. Transfer the area of the ascent holes on your anchor and grinder to the plywood. Use a 1-in. burrow bit to assignment a 1/2-in.-deep alcove at anniversary aperture location.
Then assignment through the plywood with a 3/8-in. bit and arise the accoutrement with 3/8-in. bolts, washers and nuts. Position the alcove on the ancillary of the plywood adverse the apparatus to ensure a even surface.
We busted a double-thick allotment of 3/4-in. plywood to the end of the board to accomplish a athletic ascent plate, but your board may not charge this. Any strong, collapsed apparent will work. Assignment two 1/2-in. holes into anniversary apparatus holder and mark analogous aperture locations on the ascent plate. Assignment 3/8-in. holes at the marks and attach 3/8-in. bolts with basics and washers. We recessed the basics in the ascent bowl so the apparatus holders would sit flush, but this isn't necessary.
Image Source:
Image Source:
Image Source:
Image Source:
Image Source:
Image Source:
Image Source:
Image Source:
Image Source:
Image Source:
Image Source:
Image Source: