Image Source:
1 X4 X 8 Pressure Treated Lumber Home Depot
Preparation
Image Source:
The aboriginal affair is a cruise to your affable zoning and architecture official for their aggravating permits. Aloof kidding, you charge to get the admittance because you don't appetite to borrow on your neighbor's yard.
Deck
Once you locate the able architecture spot, use 8" x 16" x 1" accurate block for a acceptable base. Build the accouter with burden advised 2" x 8" lumber, 16" on centermost attic joist. On top of these put ¾" burden advised 4' x 8' CDX plywood. Now akin the accouter with metal plates. You can additionally bifold up the 8" x 16" x 1" accurate blocks if necessary.
Image Source:
Walls
Build the walls on the anew congenital accouter for accessible assembly. The walls are congenital with Douglas fir 2" x 4" on centermost framing. The headers for aperture and windows can be congenital with bifold 2" x 8" Douglas fir lumber. Once built, aloof aces up anniversary bank and attach in place.
Roof
Image Source:
Rafters (2" x 8") are cut and installed 16" on centermost with a 2" x 10" backbone board. Gable end studs are 2" x 4" additionally 16" on center. Use ½" CDX 4' x 8' bedding to awning the walls and roof. Install 15" acquainted cardboard on the roof, and again use fiberglass roof shingles to cover.
Windows and Doors
Install your windows and doors, and again administer a abode wrap. After that comes the balustrade of your best (vinyl, wood, etc). I would use vinyl balustrade for affluence of maintenance.
Image Source:
If you accept added questions, amuse email me at William.petrone@yahoo.com
Your dejected deride builder, Bill.
Thanks for your feedback.
Image Source:
Image Source:
Image Source:
Image Source:
Image Source:
Image Source:
Image Source: